Steel Framing Alliance
Prev MonthPrev Month Next MonthNext Month
CFSEI Webinar on Updates to the AISI North American Specification and Framing Standards
Tuesday, November 29, 2022, 3:00 PM - 4:30 PM EST
Category: Events

WEBINAR ON UPDATES TO THE AISI NORTH AMERICAN SPECIFICATIONS AND STANDARDS | November 2, 2022 | 3:00 p.m. Eastern
 

UPDATES TO THE AISI NORTH AMERICAN SPECIFICATION AND FRAMING STANDARDS

November 29, 2022 | 3:00 p.m. Eastern

Presenter: Jon-Paul Cardin, P.E., American Iron and Steel Institute

The American Iron and Steel Institute (AISI) has been involved in the support of research and the development and maintenance of cold-formed steel codes, standards and specifications for 90 years. AISI sought American National Standards Institute (ANSI) accreditation and was approved as a developer of American National Standards in 1999.

AISI S100, North American Specification for the Design of Cold-Formed Steel Structural Members and the suite of AISI framing standards are the referenced documents for cold-formed steel design in the International Building Code. Every few years, AISI updates the Specification and standards to add new provisions based on the latest information from research and industry. These updates can deliver improved methods for analyzing members, provide new considerations when designing members and connections, and directly impact the design of floor, wall and roof systems. This webinar will review all of the relevant changes to these AISI documents and how they are intended for implementation into the applicable building codes.

Earn 1.5 PDHsWebinar Materials

On the day before the webinar, participants will have access to electronic versions of the following:
  • Presenter’s notes
  • Evaluation Form
  • Attendance Form

Register for Webinar

Who Should Attend?

This webinar is for architects, engineers, building officials and contractors.

Format

Web-based seminar using "Go To Meeting" technology.

Duration

 1+ hour of lecture, followed by discussion and questions. (1.5 hours total).

Cost

$75 for existing CFSEI and SFA members; Free for Student members; and $100 for non-members.

Presenter

Jon-Paul Cardin, P.E.
American Iron and Steel Institute

Jon-Paul Cardin, P.E.

Jon-Paul currently serves as a codes and standards engineer for the American Iron and Steel Institute (AISI). In this position, he represents the interests of the steel construction industry in the national codes and standards arenas. Specifically, Jon-Paul is active in the International Code Council (IBC, IRC), ASCE 7 and NFPA 5000, as well as the AISI Committee on Specifications and AISI Committee on Framing Standards. Prior to joining AISI, Jon-Paul served as the engineering manager for a steel framing manufacturer. He holds Bachelor of Science degrees in both Civil Engineering (Structural) and Mathematics from the University of Idaho.